奎河污水处理厂不停水节地全地下提标及扩建工程方案设计

奎河污水处理厂位于徐州市泉山区姚庄地区,现状处理规模为16.5万m3/d,出水水质为一级A标准.为满足周边地块发展需求及河道水质要求,需对现状污水厂进行提标扩建,污水处理厂处理规模由16.5万m3/d提高至20万m3/d,出水水质达到"准Ⅳ类"标准.工程拟通过采用分阶段、全地下集约式建设形式,实现实施过程中原厂不停水保质保量运行的目标,并释放土地资源,工程用地可由0.144 km2缩减至0.062 km2.     

Form selection of concomitant polymorphs: A case study informed by crystallization kinetics modeling

Molecular mechanisms and process kinetics of crystallizing concomitant polymorphs remain poorly understood. Solvent-mediated phase transformation and concomitant crystallization are difficult to be distinguished in practice, as multiple forms can be detected at the same time. Herein, we developed a population balance model to simulate a concomitant crystallization process of two polymorphs of tolfenamic acid. Our kinetic modeling aims to understand concomitant crystallization and help guide form selection of such a molecular system. Crystallization kinetics of ethanolic solutions were uncovered from induction time measurements, as well as seeded and unseeded crystallization experiments. Experimental and simulation results demonstrate that the stable form I crystallizes concomitantly with the metastable form II. The faster growing form II results in an intermediate decline in the composition of form I in crystallized samples, a characteristic feature of the concomitantly crystallized system. A four-quadrant scheme of attainable polymorph outcome was simulated under various crystallization conditions.     

Electrorheological response behavior of H2Ti2O5@MoS2@SiO2 core-shell nanoparticles

In this paper, a novel H₂Ti₂O₅@MoS₂@SiO₂ ternary composite material was prepared by a combination of dual hydrothermal method and controlled hydrolysis method, in which H₂Ti₂O₅ nanotubes are tightly combined with hierarchical molybdenum disulfide, and the unique structure of titanate nano whiskers, including the loosely bound alkali metal ions between the titanate layers with high dielectric constant and the large aspect ratio, which induce active response to the electric field. Flower-like molybdenum disulfide provides electrical conductivity, and silicon dioxide as a insulative coating layer can suppress excessive the electrical conductivity of the two-dimensional material. The morphological evolution was studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results of showed that the sheet-shaped molybdenum disulfide coated with curved H₂Ti₂O₅ nanotubes showed a honeycomb structure with uniform size. Silicon oxide acts as a cladding layer to increase the thickness of the flakes. The existence of H₂Ti₂O₅, molybdenum disulfide and silicon dioxide is confirmed by X-ray powder diffractometer (XRD) and Fourier transform infrared spectroscopy (FT-IR). The prepared product was confirmed by XPS, BET test and electrorheological rheometer. Core/shell nanoparticles not only exert the active response characteristics of titanate nanoparticles and molybdenum disulfide to electric field, but also inherit the excellent characteristics of a core-shell structure produced by the interface polarization and the synergistic effect of the polar groups on the surface of the two-dimensional material further enhance the electrorheological effect.     

Fabrication of ultrafast temperature-responsive nanofibrous hydrogel with superelasticity and its 'on–off' switchable drug releasing capacity

The temperature-responsive bulky hydrogel with fast response rate and satisfactory mechanical property has fascinating application potential in many aspects, such as the implantable macroscale controlled drug release carrier for post-surgical therapy; however, creating such a smart hydrogel was proven extremely challenging. Here a novel type of temperature-responsive bulky hydrogel with ultrafast response rate and super compressible elasticity was fabricated by the fibrous freeze-shaping technique using shortened temperature-responsive polymer based electrospun hollow nanofibers as building blocks, followed by heat treatment for endowing the hydrogel with high stability in water. Because the hydrogel has hierarchical porous structure and its constituent nanofibers have hollow structure, which are beneficial to diffusion of its embodied water during temperature-induced volume phase transition, its temperature-response time is less than 30 s. In addition, the hierarchical porous structure benefits dissipation of the compression stress exerted on the hydrogel. Fluorescein isothiocyanate (FITC)-dextran as a model biomacromolecular drug, was loaded into the shells of the hollow nanofibers during coaxial electrospinning, and the ultimately obtained nanofibrous hydrogel can release its loaded FITC-dextran in a 'on–off' switchable fashion in response to temperature alternation between 15 and 47°C. Cell cytotoxicity test results demonstrate that the temperature-responsive nanofibrous hydrogel is biocompatible.     

Effect of malondialdehyde oxidation on structure and physicochemical properties of amandin

Oil, accounting for 45% of almonds, is easily oxidised and can further induce the protein oxidation to reduce their quality. Structure and physicochemical properties of amandin, the main water-soluble protein in almonds, inducing oxidation by malondialdehyde (MDA) were investigated. The results showed that the content of carbonyl group increased from 5.23 to 33.25 nmol mg⁻¹ of protein with the increase in MDA concentration (P < 0.05). However, the sulphydryl content, surface hydrophobicity, particle size and the absolute value of ζ-potential first increased and then decreased. Fourier-transformed infrared spectroscopy (FT-IR) confirmed that the structure of amandin changed from order to disorder. Fluorescence spectroscopic analysis revealed that mild oxidation (0–0.1 mmol L⁻¹ MDA) exposed hydrophobic groups of the protein. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) suggested that protein oxidation promoted crosslinking between protein molecules. Furthermore, protein oxidation markedly declined the total amino acid content of amandin (P < 0.05). In conclusion, MDA oxidation changed the structure and amino acid content of amandin, and caused the protein aggregate and crosslink through hydrophobic interaction and electrostatic interaction.     

Study on the removal of olefins from naphtha by clay loaded with trifluoromethanesulfonic acid

Journal of Porous Materials - In this work, a trifluoromethanesulfonic acid (TFOH) modified clay (TFOH-Clay) was developed for the removal of trace olefins in heavy naphtha. 5%TFOH-Clay can...     

Evolutions of the Micro- and Macrostructure and Tensile Property of Cu-15Ni-8Sn Alloy During Electromagnetic Stirring-Assisted Horizontal Continuous Casting

Metallurgical and Materials Transactions B - The present study investigates the evolution of the micro- and macrostructure and tensile property of the Cu-15Ni-8Sn (weight percent) alloy prepared by...